ap332-system-overview

AP332 System Overview

Overview

• AP332 Hub
• Warpdrive Blades
• Range of Spacers
• Range of Spinners
• AC200 Control system


Specs
Power Capacity Up to 115hp (89.5kW) on gear reduced engines
Maximum Speed 2500rpm
Weight 26lbs (11.8kg) including spinner but dependent on blades selection
Mounting Flange Rotax 4in [101.6mm] PCD with 13mm bush)
5/16” UNF bolts
Engine Type Rotax 912, 912S, 914 or similar
Available Blade Types Warpdrive T62R-T72R, N62R-N72R
T62L- T72L, N62L- N72L
Bolly 68SR, 72SR
Available Configurations Clockwise / Anti Clockwise
Tractor / Pusher
(Can depend on blade choice)
Available Extensions 0.5in to 4in (12mm to 100mm)
Rotax mount
Available Spinners 8.3in (210mm), 9.0in (228mm)
10.3in (261mm), 11.2in (284mm)
12.2in (310mm)
Available Controllers AC200F, AC200, Manual only
Available Slipring Rotax Standard (RS), Rotax mini (RM)
Available Loom Length Loom Extension 20in to 216in [19in inc]
(0.5m to 5.5m [0.5m inc])
Brushblock 20in (0.5m)


Features
AP332 Hub
• Fully machined, one piece hub
• Precision pitch change mechanism
• Simple setup
• Electric actuation
• Removable blade assembly cartridge
• Full feathering options

Blade Options
Industry standard composite blades by Warpdrive Inc (USA)
• Solid nickel inlaid leading edge
• Robust ‘solid composite’ design
• Hard wearing flat black laquer finish

Spacers and Extensions
• Rotax 4in bolt pattern R
• Sizes 0.5in to 4in
• Machined from billet 6061 T651 Aluminium
• SS Drive lugs
• AN mounting hardware

Spinners
• Quality spun aluminium cone and backplate.
• Sizes 8.3,9, 10.3, 11.2, 12.2in
• Finished in Polished, Matte or White
• Fully adjustable front support
• AN Hardware used throughout

AC200 Control System
• Simple selection of engine speeds
• Hold speed adjustable in flight
• Modern ‘solid state’ governor
• Full manual overide
• Clear indicators
• Fully automatic ‘Feather available


Documentation

AP332 Brochure PDF


AP3and4 seriesOperatorManualV3.pdf


Airmaster Propeller Logbook.pdf


This entry was posted in . Bookmark the permalink. Follow any comments here with the RSS feed for this post. Trackbacks are closed, but you can post a comment.